1. Set the fields you want printed on your deposit slips under "Print on Slip."

2. Choose the fonts. The amount font must be a TrueType, fixed-width font in order to print properly.

3. Set the font sizes (in points) that best fit your deposit slip format.

If the deposit slip is set as 2-sided, there will be additional items to set.

4. Set the character spacing for amounts. This is primarily used to align digits with the pre-printed boxes or columns on some deposit slip formats. (0 is default spacing, 100 is twice normal, 200 is 3 times normal, and so on).

(enabling Decimal Point and/or Thousands Separator will disable extra character spacing.)

5. Select the printer you wish to print your deposit slips.

6. Set the overall Horizontal and Vertical alignment. This will move the entire deposit info image left-right, up-down. This also lets you leave your printer set to standard 8.5" x 11" paper.

This setting is very important when you want to position your deposit slip image on your pre-printed slip. It moves all the fields equally.

If the deposit slip is set as 2-sided, the Side 2 character spacing and Alignment controls will be enabled.